xDev Asia

Bài học về Security trong Nginx - rate limiting với limit_req/limit_conn, IP blocking, basic authentication, ModSecurity WAF integration, chống DDoS, secure headers (CSP, X-Frame-Options, CORS). Hướng dẫn bảo vệ server khỏi attacks, best practices và security hardening cho production.

Nginx từ Cơ bản đến Nâng cao

Phần 3: Security & Performance

xdev.asia

1. Rate Limiting với limit_req và limit_conn

Rate limiting bảo vệ server khỏi abuse, brute-force attacks và DDoS bằng cách giới hạn số requests từ một client.

1.1. Rate Limiting Basics (limit_req)

http {
    # Define rate limit zone
    # $binary_remote_addr: Client IP address (binary format, saves memory)
    # zone=mylimit:10m: Zone name "mylimit", 10MB memory (~160,000 IPs)
    # rate=10r/s: 10 requests per second
    limit_req_zone $binary_remote_addr zone=mylimit:10m rate=10r/s;
server {
    listen 80;
    server_name example.com;
    
    location / {
        # Apply rate limit
        limit_req zone=mylimit;
        
        proxy_pass http://backend;
    }
}

}

Rate values:

# Per second
limit_req_zone $binary_remote_addr zone=persec:10m rate=1r/s;   # 1 req/sec
limit_req_zone $binary_remote_addr zone=persec:10m rate=10r/s;  # 10 req/sec
limit_req_zone $binary_remote_addr zone=persec:10m rate=100r/s; # 100 req/sec
Per minute
limit_req_zone $binary_remote_addr zone=permin:10m rate=30r/m;  # 30 req/min
limit_req_zone $binary_remote_addr zone=permin:10m rate=120r/m; # 120 req/min
Very restrictive (login pages)
limit_req_zone $binary_remote_addr zone=login:10m rate=5r/m;    # 5 req/min

1.2. Burst và Nodelay

http {
limit_req_zone $binary_remote_addr zone=mylimit:10m rate=10r/s;
server {
    location / {
        # Allow burst of 20 requests
        limit_req zone=mylimit burst=20;
        
        # Without nodelay: excess requests delayed
        # With nodelay: excess requests processed immediately
        # limit_req zone=mylimit burst=20 nodelay;
        
        proxy_pass http://backend;
    }
}

}

Burst explained:

rate=10r/s burst=20
Request pattern:
Time 0s: 30 requests arrive simultaneously
Without burst:

Request 1-10: Processed immediately
Request 11-30: Rejected (503 error)

With burst=20:

Request 1-10: Processed immediately
Request 11-20: Queued (delayed)
Request 21-30: Rejected

With burst=20 nodelay:


Request 1-30: All processed immediately


Client "borrows" from future quota


Next 20 seconds: Client blocked (paying back debt)

1.3. Multiple Rate Limit Zones

http {
General API rate limit
limit_req_zone $binary_remote_addr zone=api:10m rate=100r/s;
Login rate limit (strict)
limit_req_zone $binary_remote_addr zone=login:10m rate=5r/m;
Search rate limit
limit_req_zone $binary_remote_addr zone=search:10m rate=10r/s;
Download rate limit
limit_req_zone $binary_remote_addr zone=download:10m rate=2r/s;
server {
listen 80;
server_name example.com;
  # General pages
  location / {
      limit_req zone=api burst=50 nodelay;
      proxy_pass http://backend;
  }
  
  # Login endpoint (very strict)
  location /api/login {
      limit_req zone=login burst=3 nodelay;
      proxy_pass http://backend;
  }
  
  # Search endpoint
  location /api/search {
      limit_req zone=search burst=20 nodelay;
      proxy_pass http://backend;
  }
  
  # Download files
  location /downloads/ {
      limit_req zone=download burst=5;
      root /var/www/downloads;
  }

}
}

1.4. Connection Limiting (limit_conn)

http {
Limit concurrent connections per IP
limit_conn_zone $binary_remote_addr zone=addr:10m;
Limit concurrent connections per server
limit_conn_zone $server_name zone=perserver:10m;
server {
listen 80;
server_name example.com;
  # Max 10 concurrent connections per IP
  limit_conn addr 10;
  
  # Max 1000 concurrent connections to this server
  limit_conn perserver 1000;
  
  location /downloads/ {
      # Stricter limit for downloads
      limit_conn addr 2;
      root /var/www/downloads;
  }

}
}

1.5. Custom Rate Limit Keys

http {
Rate limit by API key
limit_req_zone $http_x_api_key zone=apikey:10m rate=1000r/s;
Rate limit by cookie (user-based)
limit_req_zone $cookie_user_id zone=userid:10m rate=50r/s;
Rate limit by URI
limit_req_zone $request_uri zone=uri:10m rate=10r/s;
Combined key (IP + User-Agent)
map $binary_remote_addr$http_user_agent $limit_key {
default $binary_remote_addr$http_user_agent;
}
limit_req_zone $limit_key zone=combined:10m rate=20r/s;
server {
location /api/ {
# Apply appropriate limit
limit_req zone=apikey burst=100 nodelay;
proxy_pass http://backend;
}
}
}

1.6. Rate Limit Status Codes

http {
limit_req_zone $binary_remote_addr zone=mylimit:10m rate=10r/s;
Custom status code for rate limit
limit_req_status 429;  # Default: 503
server {
location / {
limit_req zone=mylimit burst=20 nodelay;
      # Custom error page
      error_page 429 /rate_limit.html;
      
      proxy_pass http://backend;
  }
  
  location = /rate_limit.html {
      internal;
      root /var/www/errors;
  }

}
}

1.7. Bypass Rate Limiting

http {
Whitelist certain IPs
geo $limit {
default 1;
10.0.0.0/8 0;       # Internal network
192.168.1.100 0;    # Admin IP
}
map $limit $limit_key {
0 "";
1 $binary_remote_addr;
}
limit_req_zone $limit_key zone=mylimit:10m rate=10r/s;
server {
location / {
limit_req zone=mylimit burst=20 nodelay;
proxy_pass http://backend;
}
}
}

1.8. Complete Rate Limiting Example

http {
Define multiple zones for different purposes
General API - moderate limit
limit_req_zone $binary_remote_addr zone=api:10m rate=100r/s;
Authentication - very strict
limit_req_zone $binary_remote_addr zone=auth:10m rate=5r/m;
Search - medium limit
limit_req_zone $binary_remote_addr zone=search:10m rate=10r/s;
File uploads - strict
limit_req_zone $binary_remote_addr zone=upload:10m rate=2r/m;
Connection limits
limit_conn_zone $binary_remote_addr zone=addr:10m;
limit_conn_zone $server_name zone=perserver:10m;
Custom status code
limit_req_status 429;
limit_conn_status 429;
Log rate limit events
limit_req_log_level warn;
server {
listen 443 ssl http2;
server_name api.example.com;
  # Global connection limit
  limit_conn addr 20;
  limit_conn perserver 10000;
  
  # General API endpoints
  location /api/ {
      limit_req zone=api burst=200 nodelay;
      
      proxy_pass http://backend;
      proxy_set_header X-Real-IP $remote_addr;
  }
  
  # Authentication endpoints (strict)
  location ~ ^/api/(login|register|reset-password) {
      limit_req zone=auth burst=3;
      
      proxy_pass http://backend;
  }
  
  # Search endpoint
  location /api/search {
      limit_req zone=search burst=30 nodelay;
      
      proxy_pass http://backend;
  }
  
  # File upload (very strict)
  location /api/upload {
      limit_req zone=upload burst=1;
      limit_conn addr 1;
      
      client_max_body_size 100M;
      proxy_pass http://backend;
  }
  
  # Rate limit error page
  error_page 429 /429.html;
  location = /429.html {
      internal;
      default_type application/json;
      return 429 '{"error":"Too many requests","retry_after":"60"}';
  }

}
}

2. Chặn IP với deny/allow

2.1. Basic IP Blocking

server {
listen 80;
server_name example.com;
Block specific IP
deny 192.168.1.100;
Block IP range
deny 192.168.1.0/24;
Block specific IPs
deny 10.0.0.5;
deny 10.0.0.10;
Allow all others
allow all;
location / {
root /var/www/html;
}
}

2.2. Whitelist Approach

server {
listen 80;
server_name admin.example.com;
Allow specific IPs only
allow 192.168.1.100;
allow 10.0.0.0/8;
allow 2001:db8::/32;  # IPv6
Deny everyone else
deny all;
location / {
root /var/www/admin;
}
}

2.3. Location-specific Blocking

server {
listen 80;
server_name example.com;
Public access
location / {
root /var/www/html;
}
Admin area - restricted
location /admin/ {
allow 192.168.1.0/24;
allow 10.0.0.100;
deny all;
  proxy_pass http://admin_backend;

}
API - whitelist only
location /api/ {
allow 203.0.113.0/24;
deny all;
  proxy_pass http://api_backend;

}
}

2.4. Geo-based Blocking

http {
Define geo blocks
geo $allowed_country {
default no;
  # US IP ranges
  192.0.2.0/24 yes;
  198.51.100.0/24 yes;
  
  # EU IP ranges
  203.0.113.0/24 yes;

}
server {
listen 80;
server_name example.com;
  if ($allowed_country = no) {
      return 403 "Access denied from your location";
  }
  
  location / {
      root /var/www/html;
  }

}
}

2.5. Block Bad Bots

http {
Define bad bots
map $http_user_agent $bad_bot {
default 0;
~malicious 1;
~scrapy 1;
~crawler 1;
~spider 1;
~bot 1;
~curl 1;
~*wget 1;
}
server {
listen 80;
server_name example.com;
  if ($bad_bot) {
      return 403 "Forbidden";
  }
  
  location / {
      root /var/www/html;
  }

}
}

2.6. Dynamic IP Blocking

Create blocklist file:

# /etc/nginx/blockips.conf
deny 192.168.1.50;
deny 10.0.0.25;
deny 203.0.113.100;

Include in Nginx:

http {
Include blocklist
include /etc/nginx/blockips.conf;
server {
listen 80;
server_name example.com;
  location / {
      root /var/www/html;
  }

}
}

Script để block IP:

#!/bin/bash


block_ip.sh
IP=$1
BLOCKLIST="/etc/nginx/blockips.conf"
if [ -z "$IP" ]; then
echo "Usage: $0 <IP_ADDRESS>"
exit 1
fi
Add IP to blocklist
echo "deny $IP;" >> $BLOCKLIST
Reload Nginx
nginx -t && systemctl reload nginx
echo "Blocked IP: $IP"

2.7. Fail2Ban Integration

Install Fail2Ban:

sudo apt install fail2ban

Configure Fail2Ban for Nginx:

# /etc/fail2ban/jail.local
[nginx-http-auth]
enabled = true
port = http,https
filter = nginx-http-auth
logpath = /var/log/nginx/error.log
maxretry = 3
bantime = 3600
[nginx-limit-req]
enabled = true
port = http,https
filter = nginx-limit-req
logpath = /var/log/nginx/error.log
maxretry = 10
bantime = 3600
[nginx-badbots]
enabled = true
port = http,https
filter = nginx-badbots
logpath = /var/log/nginx/access.log
maxretry = 2
bantime = 86400

Create filter:

# /etc/fail2ban/filter.d/nginx-limit-req.conf
[Definition]
failregex = limiting requests, excess: .* by zone .*, client: <HOST>
ignoreregex =

Restart Fail2Ban:

sudo systemctl restart fail2ban
sudo fail2ban-client status nginx-limit-req

3. Basic Authentication

3.1. Setup Basic Auth

Create password file:

# Install htpasswd utility sudo apt install apache2-utils Create user sudo htpasswd -c /etc/nginx/.htpasswd admin Add more users sudo htpasswd /etc/nginx/.htpasswd user2 Set permissions

sudo chmod 644 /etc/nginx/.htpasswd

Configure Nginx:

server {
listen 80;
server_name example.com;
location /admin/ {
    # Enable basic auth
    auth_basic "Restricted Area";
    auth_basic_user_file /etc/nginx/.htpasswd;
    
    root /var/www/admin;
}

}

3.2. Location-specific Auth

server {
listen 80;
server_name example.com;
# Public area
location / {
    root /var/www/html;
}

# Protected admin area
location /admin/ {
    auth_basic "Admin Area";
    auth_basic_user_file /etc/nginx/.htpasswd;
    root /var/www/admin;
}

# Protected API
location /api/ {
    auth_basic "API Access";
    auth_basic_user_file /etc/nginx/.htpasswd_api;
    proxy_pass http://backend;
}

}

3.3. Conditional Authentication

http {
# Whitelist IPs that don't need auth
geo $authentication {
default "Restricted";
192.168.1.0/24 "off";
10.0.0.0/8 "off";
}
server {
    listen 80;
    
    location /admin/ {
        auth_basic $authentication;
        auth_basic_user_file /etc/nginx/.htpasswd;
        
        root /var/www/admin;
    }
}

}

3.4. Multiple Auth Methods

server {
listen 80;
server_name example.com;
location /admin/ {
    # Require IP whitelist AND password
    satisfy all;
    
    # IP whitelist
    allow 192.168.1.0/24;
    deny all;
    
    # Basic auth
    auth_basic "Admin Area";
    auth_basic_user_file /etc/nginx/.htpasswd;
    
    root /var/www/admin;
}

location /staff/ {
    # Require IP whitelist OR password
    satisfy any;
    
    allow 192.168.1.0/24;
    deny all;
    
    auth_basic "Staff Area";
    auth_basic_user_file /etc/nginx/.htpasswd;
    
    root /var/www/staff;
}

}

3.5. JWT Authentication

http {
# Verify JWT token
map $http_authorization $jwt_valid {
default 0;
~^Bearer\s+([A-Za-z0-9-=]+.[A-Za-z0-9-=]+.?[A-Za-z0-9-_.+/=]) 1;
}
server {
    listen 80;
    
    location /api/ {
        if ($jwt_valid = 0) {
            return 401 '{"error":"Invalid or missing token"}';
        }
        
        # Forward token to backend for validation
        proxy_pass http://backend;
        proxy_set_header Authorization $http_authorization;
    }
}

}

4. ModSecurity WAF Integration

ModSecurity là Web Application Firewall (WAF) bảo vệ khỏi common attacks.

4.1. Install ModSecurity

# Ubuntu/Debian sudo apt update sudo apt install libmodsecurity3 libmodsecurity-dev Clone connector cd /opt sudo git clone https://github.com/SpiderLabs/ModSecurity-nginx.git Get Nginx version nginx -v Download Nginx source (same version) cd /opt wget http://nginx.org/download/nginx-1.24.0.tar.gz tar -xzf nginx-1.24.0.tar.gz cd nginx-1.24.0 Compile with ModSecurity module ./configure --add-dynamic-module=/opt/ModSecurity-nginx make modules Copy module sudo cp objs/ngx_http_modsecurity_module.so /etc/nginx/modules/ Load module in nginx.conf sudo nano /etc/nginx/nginx.conf Add at top:

load_module modules/ngx_http_modsecurity_module.so;

4.2. Configure ModSecurity

# Create config directory sudo mkdir /etc/nginx/modsec cd /etc/nginx/modsec Download OWASP Core Rule Set sudo git clone https://github.com/coreruleset/coreruleset.git Copy config files sudo cp /opt/ModSecurity/modsecurity.conf-recommended modsecurity.conf sudo cp /opt/ModSecurity/unicode.mapping . Edit config sudo nano modsecurity.conf Change:

SecRuleEngine On # Enable rules SecAuditLog /var/log/modsec_audit.log

4.3. Enable in Nginx

http {
# Load ModSecurity module
load_module modules/ngx_http_modsecurity_module.so;
server {
    listen 80;
    server_name example.com;
    
    # Enable ModSecurity
    modsecurity on;
    modsecurity_rules_file /etc/nginx/modsec/modsecurity.conf;
    
    location / {
        proxy_pass http://backend;
    }
}

}

4.4. OWASP Core Rule Set

# Main config file sudo nano /etc/nginx/modsec/main.conf Add:

Include /etc/nginx/modsec/modsecurity.conf Include /etc/nginx/modsec/coreruleset/crs-setup.conf Include /etc/nginx/modsec/coreruleset/rules/*.conf

Update Nginx config:

server {
listen 80;
server_name example.com;
modsecurity on;
modsecurity_rules_file /etc/nginx/modsec/main.conf;

location / {
    proxy_pass http://backend;
}

}

4.5. Custom ModSecurity Rules

# /etc/nginx/modsec/custom_rules.conf Block SQL injection attempts SecRule ARGS "@detectSQLi" "id:1001,phase:2,deny,status:403,msg:'SQL Injection Detected'" Block XSS attempts SecRule ARGS "@detectXSS" "id:1002,phase:2,deny,status:403,msg:'XSS Detected'" Block file upload exploits SecRule FILES "@rx .(?:php|exe|sh)$" "id:1003,phase:2,deny,status:403,msg:'Dangerous file upload'" Rate limiting per IP

SecRule IP:REQUEST_COUNT "@gt 100" "id:1004,phase:1,deny,status:429,msg:'Rate limit exceeded'"

5. Chống DDoS Cơ bản

5.1. Connection Limits

http {
# Limit connections per IP
limit_conn_zone $binary_remote_addr zone=addr:10m;
# Limit request rate
limit_req_zone $binary_remote_addr zone=req:10m rate=10r/s;

server {
    listen 80;
    server_name example.com;
    
    # Apply limits
    limit_conn addr 10;
    limit_req zone=req burst=20 nodelay;
    
    location / {
        proxy_pass http://backend;
    }
}

}

5.2. Timeout Protection

http {
# Short timeouts to free resources quickly
client_body_timeout 10s;
client_header_timeout 10s;
send_timeout 10s;
# Limit request body size
client_max_body_size 1M;

server {
    listen 80;
    
    location / {
        proxy_pass http://backend;
        
        # Backend timeouts
        proxy_connect_timeout 5s;
        proxy_send_timeout 10s;
        proxy_read_timeout 10s;
    }
}

}

5.3. Block Attack Patterns

http {
# Block bad methods
map $request_method $bad_method {
default 0;
~*^(TRACE|DELETE|PUT) 1;
}
# Block suspicious URIs
map $request_uri $bad_uri {
    default 0;
    ~*\.\./\.\. 1;  # Directory traversal
    ~*\.(bash|git|svn|env|log) 1;
    ~*\.(php|asp|aspx|jsp)\. 1;  # Double extensions
}

# Block bad referers
map $http_referer $bad_referer {
    default 0;
    ~*porn 1;
    ~*casino 1;
    ~*viagra 1;
}

server {
    listen 80;
    
    if ($bad_method) {
        return 405;
    }
    
    if ($bad_uri) {
        return 403;
    }
    
    if ($bad_referer) {
        return 403;
    }
    
    location / {
        proxy_pass http://backend;
    }
}

}

5.4. SYN Flood Protection

# System-level protection sudo nano /etc/sysctl.conf Add: net.ipv4.tcp_syncookies = 1 net.ipv4.tcp_max_syn_backlog = 2048 net.ipv4.tcp_synack_retries = 2 net.ipv4.tcp_syn_retries = 2 Apply

sudo sysctl -p

5.5. Slowloris Protection

http {
# Protect against slowloris
client_body_timeout 10s;
client_header_timeout 10s;
send_timeout 10s;
# Limit header size
large_client_header_buffers 2 1k;

# Request body limits
client_body_buffer_size 1k;
client_max_body_size 1M;

server {
    listen 80;
    
    location / {
        proxy_pass http://backend;
    }
}

}

5.6. Complete DDoS Protection

http {
# Connection limits
limit_conn_zone $binary_remote_addr zone=addr:10m;
limit_conn_zone $server_name zone=perserver:10m;
# Rate limits
limit_req_zone $binary_remote_addr zone=general:10m rate=10r/s;
limit_req_zone $binary_remote_addr zone=strict:10m rate=1r/s;

# Timeouts
client_body_timeout 10s;
client_header_timeout 10s;
send_timeout 10s;
keepalive_timeout 30s;

# Size limits
client_body_buffer_size 1k;
client_max_body_size 1M;
client_header_buffer_size 1k;
large_client_header_buffers 2 1k;

# Bad patterns
map $request_method $bad_method {
    default 0;
    ~*^(TRACE|DELETE|PUT|PATCH) 1;
}

map $http_user_agent $bad_bot {
    default 0;
    "" 1;  # Empty user agent
    ~*bot 1;
    ~*crawler 1;
    ~*spider 1;
}

server {
    listen 80;
    server_name example.com;
    
    # Connection limits
    limit_conn addr 20;
    limit_conn perserver 10000;
    
    # Rate limits
    limit_req zone=general burst=50 nodelay;
    
    # Block bad requests
    if ($bad_method) {
        return 405;
    }
    
    if ($bad_bot) {
        return 403;
    }
    
    # General content
    location / {
        proxy_pass http://backend;
        
        proxy_connect_timeout 5s;
        proxy_send_timeout 10s;
        proxy_read_timeout 10s;
    }
    
    # Sensitive endpoints (stricter)
    location /api/admin/ {
        limit_req zone=strict burst=5;
        limit_conn addr 5;
        
        allow 192.168.1.0/24;
        deny all;
        
        proxy_pass http://backend;
    }
}

}

6. Secure Headers

6.1. X-Frame-Options

Prevents clickjacking attacks.

server {
listen 443 ssl http2;
server_name example.com;
# Prevent framing (clickjacking)
add_header X-Frame-Options "SAMEORIGIN" always;

# Or completely deny framing:
# add_header X-Frame-Options "DENY" always;

# Or allow specific origin:
# add_header X-Frame-Options "ALLOW-FROM https://trusted.com" always;

}

6.2. X-Content-Type-Options

Prevents MIME-type sniffing.

server {
listen 443 ssl http2;
# Prevent MIME sniffing
add_header X-Content-Type-Options "nosniff" always;

}

6.3. X-XSS-Protection

Enables browser XSS filter.

server {
listen 443 ssl http2;
# Enable XSS filter
add_header X-XSS-Protection "1; mode=block" always;

}

6.4. Referrer-Policy

Controls referrer information.

server { listen 443 ssl http2; # Referrer policy add_header Referrer-Policy "no-referrer-when-downgrade" always; # Options: # no-referrer - Never send referrer # no-referrer-when-downgrade - Send on HTTPS->HTTPS, not HTTPS->HTTP # origin - Send only origin # origin-when-cross-origin - Full URL for same origin, origin for cross-origin # same-origin - Send only for same origin # strict-origin - Send origin for HTTPS->HTTPS # strict-origin-when-cross-origin - Recommended # unsafe-url - Always send full URL

}

6.5. Content-Security-Policy (CSP)

Powerful defense against XSS and injection attacks.

server {
listen 443 ssl http2;
server_name example.com;
# Basic CSP
add_header Content-Security-Policy "default-src 'self'; script-src 'self' 'unsafe-inline' https://cdn.example.com; style-src 'self' 'unsafe-inline'; img-src 'self' data: https:; font-src 'self' https://fonts.gstatic.com; connect-src 'self' https://api.example.com; frame-ancestors 'self';" always;

}

CSP directives explained:

# Strict CSP (most secure)
add_header Content-Security-Policy "
default-src 'self';
script-src 'self';
style-src 'self';
img-src 'self';
font-src 'self';
connect-src 'self';
frame-ancestors 'none';
base-uri 'self';
form-action 'self';
" always;
Moderate CSP (allows CDNs)
add_header Content-Security-Policy "
default-src 'self';
script-src 'self' 'unsafe-inline' https://cdn.jsdelivr.net https://code.jquery.com;
style-src 'self' 'unsafe-inline' https://fonts.googleapis.com;
img-src 'self' data: https:;
font-src 'self' https://fonts.gstatic.com;
connect-src 'self' https://api.example.com;
frame-ancestors 'self';
" always;
Report-only mode (testing)
add_header Content-Security-Policy-Report-Only "
default-src 'self';
report-uri /csp-report;
" always;

6.6. Permissions-Policy

Controls browser features.

server {
listen 443 ssl http2;
# Permissions policy (formerly Feature-Policy)
add_header Permissions-Policy "
    geolocation=(self),
    microphone=(),
    camera=(),
    payment=(),
    usb=(),
    magnetometer=(),
    gyroscope=(),
    accelerometer=()
" always;

}

6.7. CORS Headers

server {
listen 443 ssl http2;
server_name api.example.com;
location /api/ {
    # CORS headers
    add_header Access-Control-Allow-Origin "https://app.example.com" always;
    add_header Access-Control-Allow-Methods "GET, POST, PUT, DELETE, OPTIONS" always;
    add_header Access-Control-Allow-Headers "Authorization, Content-Type, X-Requested-With" always;
    add_header Access-Control-Allow-Credentials "true" always;
    add_header Access-Control-Max-Age "3600" always;
    
    # Handle preflight OPTIONS requests
    if ($request_method = OPTIONS) {
        return 204;
    }
    
    proxy_pass http://backend;
}

}

Wildcard CORS (use with caution):

location /api/ {
add_header Access-Control-Allow-Origin "*" always;
add_header Access-Control-Allow-Methods "GET, POST, OPTIONS" always;
add_header Access-Control-Allow-Headers "Content-Type" always;
if ($request_method = OPTIONS) {
    return 204;
}

proxy_pass http://backend;

}

6.8. Complete Security Headers

server {
listen 443 ssl http2;
listen [::]:443 ssl http2;
server_name example.com;
# SSL configuration
ssl_certificate /etc/letsencrypt/live/example.com/fullchain.pem;
ssl_certificate_key /etc/letsencrypt/live/example.com/privkey.pem;
ssl_protocols TLSv1.2 TLSv1.3;

# Security headers
add_header Strict-Transport-Security "max-age=31536000; includeSubDomains; preload" always;
add_header X-Frame-Options "SAMEORIGIN" always;
add_header X-Content-Type-Options "nosniff" always;
add_header X-XSS-Protection "1; mode=block" always;
add_header Referrer-Policy "strict-origin-when-cross-origin" always;

add_header Content-Security-Policy "
    default-src 'self';
    script-src 'self' 'unsafe-inline' https://cdn.jsdelivr.net;
    style-src 'self' 'unsafe-inline' https://fonts.googleapis.com;
    img-src 'self' data: https:;
    font-src 'self' https://fonts.gstatic.com;
    connect-src 'self' https://api.example.com;
    frame-ancestors 'self';
    base-uri 'self';
    form-action 'self';
" always;

add_header Permissions-Policy "
    geolocation=(self),
    microphone=(),
    camera=(),
    payment=(),
    usb=()
" always;

# Hide Nginx version
server_tokens off;

# Additional security
more_clear_headers Server;
more_clear_headers X-Powered-By;

root /var/www/html;
index index.html;

location / {
    try_files $uri $uri/ =404;
}

}

7. Complete Security Configuration

7.1. Production-Ready Security Setup

# /etc/nginx/nginx.conf
user nginx;
worker_processes auto;
worker_rlimit_nofile 65535;
error_log /var/log/nginx/error.log warn;
pid /var/run/nginx.pid;
events {
worker_connections 4096;
use epoll;
multi_accept on;
}
http {
include /etc/nginx/mime.types;
default_type application/octet-stream;
# Hide version
server_tokens off;
more_clear_headers Server;

# Rate limiting zones
limit_req_zone $binary_remote_addr zone=general:10m rate=10r/s;
limit_req_zone $binary_remote_addr zone=login:10m rate=5r/m;
limit_req_zone $binary_remote_addr zone=api:10m rate=100r/s;

# Connection limiting
limit_conn_zone $binary_remote_addr zone=addr:10m;
limit_conn_zone $server_name zone=perserver:10m;

# Status codes
limit_req_status 429;
limit_conn_status 429;

# IP blocklist
include /etc/nginx/blockips.conf;

# Bad bot blocking
map $http_user_agent $bad_bot {
    default 0;
    "" 1;
    ~*bot 1;
    ~*crawler 1;
    ~*scraper 1;
}

# Bad methods
map $request_method $bad_method {
    default 0;
    ~*^(TRACE|DELETE|PUT) 1;
}

# Timeouts
client_body_timeout 12s;
client_header_timeout 12s;
send_timeout 10s;
keepalive_timeout 65s;

# Size limits
client_body_buffer_size 128k;
client_max_body_size 10M;
client_header_buffer_size 1k;
large_client_header_buffers 4 8k;

# Logging
log_format security '$remote_addr - $remote_user [$time_local] '
                   '"$request" $status $body_bytes_sent '
                   '"$http_referer" "$http_user_agent" '
                   'rt=$request_time uct=$upstream_connect_time '
                   'uht=$upstream_header_time urt=$upstream_response_time';

access_log /var/log/nginx/access.log security;

# Include configs
include /etc/nginx/conf.d/*.conf;
include /etc/nginx/sites-enabled/*;

}

7.2. Secure Site Configuration

# /etc/nginx/sites-available/example.com
Upstream
upstream backend {
least_conn;
server backend1:8080 max_fails=3 fail_timeout=30s;
server backend2:8080 max_fails=3 fail_timeout=30s;
keepalive 32;
}
HTTP -> HTTPS redirect
server {
listen 80;
listen [::]:80;
server_name example.com www.example.com;
# Block bad bots
if ($bad_bot) {
    return 403;
}

# Block bad methods
if ($bad_method) {
    return 405;
}

location /.well-known/acme-challenge/ {
    root /var/www/html;
}

location / {
    return 301 https://example.com$request_uri;
}

}
Main HTTPS server
server {
listen 443 ssl http2;
listen [::]:443 ssl http2;
server_name example.com;
root /var/www/html;
index index.html;

# SSL
ssl_certificate /etc/letsencrypt/live/example.com/fullchain.pem;
ssl_certificate_key /etc/letsencrypt/live/example.com/privkey.pem;
ssl_protocols TLSv1.2 TLSv1.3;
ssl_session_cache shared:SSL:10m;
ssl_stapling on;
ssl_stapling_verify on;

# Security headers
add_header Strict-Transport-Security "max-age=31536000; includeSubDomains; preload" always;
add_header X-Frame-Options "SAMEORIGIN" always;
add_header X-Content-Type-Options "nosniff" always;
add_header X-XSS-Protection "1; mode=block" always;
add_header Referrer-Policy "strict-origin-when-cross-origin" always;
add_header Content-Security-Policy "default-src 'self'; script-src 'self' 'unsafe-inline'; style-src 'self' 'unsafe-inline';" always;

# Connection limits
limit_conn addr 20;
limit_conn perserver 10000;

# Rate limiting
limit_req zone=general burst=50 nodelay;

# Block bad requests
if ($bad_bot) {
    return 403;
}

if ($bad_method) {
    return 405;
}

# Main location
location / {
    try_files $uri $uri/ =404;
}

# API endpoints
location /api/ {
    limit_req zone=api burst=200 nodelay;
    
    proxy_pass http://backend/;
    proxy_http_version 1.1;
    proxy_set_header Connection "";
    proxy_set_header Host $host;
    proxy_set_header X-Real-IP $remote_addr;
    proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
    proxy_set_header X-Forwarded-Proto $scheme;
}

# Login endpoint (strict rate limit)
location /api/login {
    limit_req zone=login burst=3;
    
    proxy_pass http://backend/api/login;
    proxy_http_version 1.1;
    proxy_set_header Connection "";
}

# Admin area (IP whitelist + auth)
location /admin/ {
    satisfy all;
    
    allow 192.168.1.0/24;
    allow 10.0.0.100;
    deny all;
    
    auth_basic "Admin Area";
    auth_basic_user_file /etc/nginx/.htpasswd;
    
    proxy_pass http://backend/admin/;
}

# Static assets
location ~* \.(jpg|jpeg|png|gif|ico|css|js)$ {
    expires 1y;
    add_header Cache-Control "public, immutable";
    access_log off;
}

# Deny hidden files
location ~ /\. {
    deny all;
    access_log off;
    log_not_found off;
}

# Error pages
error_page 403 /403.html;
error_page 404 /404.html;
error_page 429 /429.html;
error_page 500 502 503 504 /50x.html;

}

8. Security Testing và Monitoring

8.1. Security Scanners

# Nikto vulnerability scanner nikto -h https://example.com OWASP ZAP zap-cli quick-scan https://example.com SSL Labs test Visit: https://www.ssllabs.com/ssltest/ Security Headers test Visit: https://securityheaders.com

8.2. Monitor Attacks

#!/bin/bash
monitor_attacks.sh
LOG_FILE="/var/log/nginx/access.log"
ERROR_LOG="/var/log/nginx/error.log"
echo "Security Monitoring"
echo "=================="
Failed login attempts
echo "Failed Login Attempts:"
grep "/api/login" $LOG_FILE | grep -c " 401 "
Rate limit hits
echo "Rate Limit Hits:"
grep "limiting requests" $ERROR_LOG | wc -l
Blocked IPs
echo "Blocked IPs:"
grep " 403 " $LOG_FILE | awk '{print $1}' | sort | uniq -c | sort -rn | head -10
Suspicious URLs
echo "Suspicious URLs:"
grep -E "../|.php.|.env|.git" $LOG_FILE | wc -l
Top 403 URLs
echo "Top 403 URLs:"
grep " 403 " $LOG_FILE | awk '{print $7}' | sort | uniq -c | sort -rn | head -10

8.3. Real-time Alerts

#!/bin/bash
security_alert.sh
THRESHOLD=100
EMAIL="[email protected]"
Check rate limit hits
RATE_LIMIT_HITS=$(grep "limiting requests" /var/log/nginx/error.log | wc -l)
if [ $RATE_LIMIT_HITS -gt $THRESHOLD ]; then
echo "ALERT: $RATE_LIMIT_HITS rate limit hits detected" | mail -s "Security Alert" $EMAIL
fi
Check for SQL injection attempts
SQL_ATTEMPTS=$(grep -E "union.*select|concat(|load_file" /var/log/nginx/access.log | wc -l)
if [ $SQL_ATTEMPTS -gt 0 ]; then
echo "ALERT: $SQL_ATTEMPTS SQL injection attempts detected" | mail -s "SQL Injection Alert" $EMAIL
fi

Tổng kết

Trong bài này, bạn đã học:

✅ Rate limiting với limit_req và limit_conn
✅ IP blocking và whitelisting
✅ Basic authentication và JWT
✅ ModSecurity WAF integration
✅ DDoS protection techniques
✅ Secure headers (CSP, X-Frame-Options, CORS)
✅ Security testing và monitoring

Security checklist:

✅ Rate limiting enabled
✅ IP blocklist configured
✅ Authentication on sensitive areas
✅ All security headers present
✅ SSL/TLS properly configured
✅ Fail2Ban integrated
✅ Regular security audits
✅ Monitoring và alerting active

Bài tiếp theo: Rewrite và Redirects - regex patterns, return vs rewrite directives, location matching, try_files và conditional redirects để quản lý URL routing effectively.

Bài 9: Security trong NGINX

1. Rate Limiting với limit_req và limit_conn

1.1. Rate Limiting Basics (limit_req)

Per minute

Very restrictive (login pages)

1.2. Burst và Nodelay

1.3. Multiple Rate Limit Zones

General API rate limit

Login rate limit (strict)

Search rate limit

Download rate limit

1.4. Connection Limiting (limit_conn)

Limit concurrent connections per IP

Limit concurrent connections per server

1.5. Custom Rate Limit Keys

Rate limit by API key

Rate limit by cookie (user-based)

Rate limit by URI

Combined key (IP + User-Agent)

1.6. Rate Limit Status Codes

Custom status code for rate limit

1.7. Bypass Rate Limiting

Whitelist certain IPs

1.8. Complete Rate Limiting Example

Define multiple zones for different purposes

General API - moderate limit

Authentication - very strict

Search - medium limit

File uploads - strict

Connection limits

Custom status code

Log rate limit events

2. Chặn IP với deny/allow

2.1. Basic IP Blocking

Block specific IP

Block IP range

Block specific IPs

Allow all others

2.2. Whitelist Approach

Allow specific IPs only

Deny everyone else

2.3. Location-specific Blocking

Public access

Admin area - restricted

API - whitelist only

2.4. Geo-based Blocking

Define geo blocks

2.5. Block Bad Bots

Define bad bots

2.6. Dynamic IP Blocking

Include blocklist

block_ip.sh

Add IP to blocklist

Reload Nginx

2.7. Fail2Ban Integration

3. Basic Authentication

3.1. Setup Basic Auth

Create user

Add more users

Set permissions

3.2. Location-specific Auth

3.3. Conditional Authentication

3.4. Multiple Auth Methods

3.5. JWT Authentication

4. ModSecurity WAF Integration

4.1. Install ModSecurity

Clone connector

Get Nginx version

Download Nginx source (same version)

Compile with ModSecurity module

Copy module

Load module in nginx.conf

Add at top:

4.2. Configure ModSecurity

Download OWASP Core Rule Set

Copy config files

Edit config

Change:

4.3. Enable in Nginx

4.4. OWASP Core Rule Set